Floureon 4CH 960H Digital Video Recorder HDMI DVR+Outdoor Night Vision Bullet Camera 900TVL Waterproof IR LED CCTV Security Cameras 4 Packs, 60ft Cables – No HDD details, interesting information along with costumer reviews who currently purchased plus best price along with quite nice discount.
Placing a surveillance DVR in your home is simple since it comes with instructions how to set it up. Thus, you will be guided step by step how to set it up and how to utilize it. These kinds of DVRs come in most forms and all sizes. There are even surveillance DVRs that come as pens and flashlights. Do not be surprised if you found yourself being recorded at a friend’s home. You can even convert your laptop or your desktop computer as a surveillance system. The USB interface of your laptop can be converted into a DVR. How’s that for a surveillance machine and you do not have to buy a complete new system. Just get a DVR card that can fit in the slot of your existing laptop. The most common types of card are the PCI card. These kinds of cards can accommodate up to 16 channel types and each channel needs one camera. Thus, you choose how many cameras you should have for your home.
This product made by Floureon become one of the top recomended Surveillance DVR Kits since a lot of customers fulfilled after using this item. In addition to its features, the best price also becomes a factor. Below is a review about Floureon 4CH 960H Digital Video Recorder HDMI DVR+Outdoor Night Vision Bullet Camera 900TVL Waterproof IR LED CCTV Security Cameras 4 Packs, 60ft Cables – No HDD, a product favored by buyers and have a lot of beneficial reviews. We will give you customer reviews, product features, descriptions, and a variety of other interesting things. Happy reading.
Floureon 4CH 960H Digital Video Recorder HDMI DVR+Outdoor Night Vision Bullet Camera 900TVL Waterproof IR LED CCTV Security Cameras 4 Packs, 60ft Cables – No HDD Details and Reviews
179 of 189 people found the following review helpful.
For The Money – It’s a Bargain! -but “technically vague” – TUTORIAL BELOW!
By Guitar Operator
OVERVIEW: (scroll down for TUTORIAL)
For The Money – It’s a Bargain, but “challenging & technical to set up”
I paid my dues and was able to get 99% of everything working well.
Local, Remote, Internet, Mobile Device, Email Alerts with a Snapshot photo attached to Text Message on my phone, etc…
…but it sure wudn’t easy, folks!! (lol)
It also helps if you can translate “Engrish with a Geek accent.”
The poorly translated “Engrish” manual is tough to decipher. Someone mentioned that it would probably be better to have an instruction manual written in pure Chinese and then have a friend read it to you in English…but I digress – onto the review.
First off, I am a licensed CompTIA A+ Certified PC Technician and a Microsoft Certified Systems Engineer (MCSE) since 2000.
I confidently know my way around Windows PC and general (+advanced) network settings, procedures and troubleshooting.
Yes, the manuals are worse than poorly written, but don’t throw them away because there’s just enough decoding you can decipher to help you understand settings & menus, terminology, descriptions & procedures…but don’t get your hopes too high. lol.
The software & menus within the applications are the same type of “pseudo-gibberish” that almost sound like real grammatical sentences until you read them for the third or fourth time and go down a few rabbit holes.
If you have a moderate basic to medium understanding of general network settings and which networking settings to adjust -not only in Windows but within the Floureon software too, you can get through this…just set aside a whole day and stay calm. lol.
Floureon…what a silly name. Most likely has origins synonymous to “Donkey Kong.” …but I digress. 😉
I just received the unit and it took me the better part of a whole day to “figure it out” with god only knows how many restarts, adjustments, pot-shots in the dark, going back and forth until I got it ALL to work.
For an “easy to read manual” & system tailor-made for US Consumers, you will pay 20 times as much for almost the same type system, so think about your mental & physical well-being and choose wisely if you don’t want to go through the hassle and can justify the over-priced, and much easier to setup brands…but even those take a little technical savvy to get all the features working…BUT FEAR NOT IF YOU CHOOSE TO ATTEMPT SUCCESS!
I plan on taking a little time to write a comprehensive review as well as “easy to understand” setup instructions to get you up and running in as little time as possible. – Hang in there. I am exhausted from figuring this darn Chinese contraption, setting it up, mounting the cameras, running the cables, drilling holes in my house.
THIS IS A CHEAP SYSTEM THAT WORKS WELL FOR AVERAGE HOME USE.
For what little they are charging ( and fast USA Seller/Shipper, too!) keep your mouth shut and use it for what it is unless you need super high quality video costing $2000 or more.
Yes, the cameras are a little grainy in low light, but amazingly clear in good outside bright days or light overcast.
When the light gets too low the cameras will automatically switch over to the “night vision” and many times appear clearer and sharper than the full color in lower light. Night-vision is “black & white” monochrome video image to see in the dark.
I make sure I turn off certain lights in the house when I leave because the lower-level home lighting is sometimes not as bright and clear as when the cameras go into Night Vision mode. I consider this a good feature.
From the online product images, the video connector jacks look like RCA’s, and they fooled me due to my assumption.
The video Input & Output connections are “BNC” type and NOT (Standard-type) RCA, -so keep that in mind if you replace cameras or use the Analog Video Output to record from onto a VHS, DVD recorder, etc., you will have to buy a cheap BNC-to-RCA adapter cable. I suggest getting the “Cable version” and not a hard metal adapter which can cause strain on the cheap & flimsy connectors on the rear of the DVR Security recorder.
Using the HDMI Video Out hooked to my TV made it easy to see, program and navigate through the menus with the included wired USB Laser Mouse.
The minor downfall is you must click each letter, character & symbol one at a time using the mouse to enter in all the IP, DNS, Email, Server info, Addresses, etc…but it “wudn’t” too aggravating and went quite fast, though there were some “anomalies” like having a hard time “backspacing over” email addresses, and server fields. The mouse got kind of “squirrelly” and I had to get “click happy” until I figured out how to make it obey.
You can get it all working if you have a general PC & Network knowledge and you’ll save a lot of money.
REMEMBER – This comes with NO SATA II HARD DRIVE to record and save videos and snapshots. (only use SATA II)
It took me one minute to screw a hard drive onto the DVR chassis and plug in two cables, and then went into the MANAGE HDD utility menu to FORMAT the drive and set it up for READ & WRITE.
I am able to receive my four camera on my mobile phone – and even at my slow 3G speed it works great!
(I can only imagine what 4G would be like! 🙂 )
Again, it took a little fiddling around with ALL the setting and configurations several times until I got it to work.
(The Android & iPhone install files are on the included mini CD-ROM disc.)
The mini CD-ROM Disc with all the software and utilities is another “Engrish Mystery!” -lol.
Vague folder labels with incongruent installation instructions – so hang on and I will guide you through it.)
CMS is the Software App for your Home or Remote Computer to access the cameras and settings.
I suggest installing, but NOT using the CMS Desktop utility, instead, simply use INTERNET EXPLORER (only) Browser to logon to your DVR (using either the private local IP address assigned to the DVR (192.168.(2 or 1).XX)–or- the Internet IP address of your cable modem. This is your real IP address that is assigned by your ISP (Internet Service Provider).
If you have a ROUTER or WIRELESS ROUTER connected to your Cable Modem or DSL equipment, you will have to set a couple of networking parameters.
In order for your DVR to “get out” to the Internet you will have to set any Firewalls to “Allow Access” inbound and outbound.
Here are the methods assuming your have a Home Router with multiple computers and devices:
1. Logon to your Router using Internet Explorer Browser.
2. Go into the Network Settings of the ROUTER and check your LOCAL DCHP or IP address range.
This is usually something like 192.168.2.1 or 192.168.1.1 – write down the first three “octets” (-e.g.192.168.2 )
3. Find the actual IP address assigned by your ISP and write it down (example 22.214.171.124 ) This is your REAL IP address on the public Internet and World Wide Web.
If you have a hard time finding it, go to “domainwhitepages(dot)com” and it will show you your real IP address under the little input box next to the word “user” – you’ll see it. (very small under the input form.)
4. While logged onto the Router write down the DNS IP Addresses. There should be two of them. (DNS servers are the “things” that translate domain names like Amazon to Internet IP Address Numbers.)
5. Hook up the DVR to a TV or monitor (HDMI or VGA). There is no ON/OFF switch. Plug in the included USB Mouse.
– Connect an Ethernet (Internet) cable to the DVR from your home Router.
– The DVR takes over one minute to “boot up” and become functional.
6. Upon first boot, the DVR will walk you through (or try to) initial setup menus.
(Side Note: Do Not unroll cables, mount cameras, lose parts or packaging. Hook up the four cameras and leave them close to make sure everything works before having to pack it all back up in case there are problems, defects, etc.)
7. You should see all four cameras working on your monitor.
Remember, unless you install a SATA II Hard Drive or record a stream remotely to another computer through your network, you will not be able to record anything. I strongly suggest getting a 1 GB SATA II HDD. Installation is only 4 small screws and two small cables inside the DVR unit.
8. Set up your DVR for network access:
– Right Click anywhere on the screen to bring up the DVR MENU.
– Select MAIN MENU
– “Fish around” and go into SYSTEM MENU and then NETWORK sub-menu and click to enter the settings menu for the network.
– Decide what “number” to give your DVR. This is the numbers in the last octet. I use “192.168.2.88” with “88” being the DVR’s address.
– Remember: The first three octets (e.g. -“192.168.2.xx” or “192.168.1.xx” should not be changed from the same settings as your ROUTER. Check your Router settings & IP)
– DO NOT select DHCP for best results. Keep the DVR’s address static and unchanging.
– Subnet Mask should most likely be “255.255.255.0” and then enter in your two DNS server addresses. If you do not have the DNS server IP’s, then simply write down your Router’s Gateway IP (main IP of Router) -example “192.168.1.1” -or- 192.168.2.1″ ) and use “0.0.0.0” for the second DNS IP address.
– REBOOT the DVR after making these settings & changes.
The DVR takes over one minute to “boot up” and become functional.
9. After DVR Reboot go to a remote local computer and start INTERNET EXPORER Browser (only) and enter in the IP address you assigned your DVR (ex. 192.168.2.88 )
– You should see the WEB CLIENT LOGON BOX for your DVR in Internet Explorer.
– For USER type in “admin” – leave the password blank unless you have changed it.
– You should now be logged on remotely to your DVR from a computer.
(NOTE: To logon to your DVR from OUTSIDE your local home network you will need to set up your Router. Steps explained below.
10. – You can now administer, change settings, etc. remotely. The “look” of using a remote browser is a little different than changing settings directly on the DVR using the mouse, but works the same.
11. Click the DEVICE CONFIG link at the top of your browser window (or Main Menu from the DVR directly)
– The MAIN MENU has 5 Main Sections:
The RECORD MENU has two sub-menus “Record & Snapshot Storag” (Engrish -lol) to adjust the cameras ALL or Individually 1,2,3,4 for main recording and snapshot recording. Fiddle around and you will figure it out.
The ALARM MENU has 4 sub-menus to adjust for Motion Detection, Video Blinding, Video Loss and a setting for the Alarm Output function.
The SYSTEM MENU has several settings
GENERAL – set time, date & format mm/dd/yyyy, etc.)
ENCODE – Sets the video quality settings for recording and viewing remotely.
-You can set the remote viewing called “Extra Stream” to be less quality, faster viewing with less data and bandwidth for mobile devices and remote computers with slow connections.
NETWORK – General settings
NETSERVICE – Settings for EMAIL, FTP and others. Settings are standard. I will not go into “email setup” in this tutorial.
-If you want Motion Detection alerts, photo snapshots, or other “alarms” messages to be sent to your mobile phone or email you will need to set this up.
GUI DISPLAY – Here you can name the cameras, show or remove the time, date, or titles of each camera.
PTZ – Is the “Pan, Tilt, Zoom function of cameras that have those features available. Cameras included with this system do not have the PTZ feature.
RS-232 – Computer interface connection. (older models)
12. In the ADVANCED MENU is where you can:
HDD – setup your Hard Disk Drive (HDD) Format it and set it for READ/WRITE to record and store videos and snapshots.
ACCOUNT – configure and set passwords for admin & user accounts.
AUTO-MAINTAIN – Sets the time & day /frequency to reboot and restart the DVR.
DEFAULT – Reset DVR to initial factory settings. (the “oops” button)
REBOOT – Restart the DVR. This is good to do whenever you make any settings changes.
UPGRADE – Still working on this one! -lol. I assume there is an “upgrade file” to upgrade/update the Firmware in the DVR.
-NOTE: Bottom line: If everything is working fine – Do Not Upgrade or Update.
13. INFO MENU – HDD Info, Avail Storage, / LOGS / VERSION INFO
ADDITIONAL ROUTER SETTINGS IMPORTANT:
In order for you to view or administer your DVR remotely from OUTSIDE your home network you have to change or setup your Router.
1. Logon to your Router using a browser.
2. Go to the DMZ settings and “allow or set” the DVR’s IP Address to full open access.
– Enter the IP address of your Router into this setting. Example: “192.168.2.88”
IF STEP 2 DOES NOT ALLOW REMOTE INTERNET CONNECTIVITY, THEN TRY STEP 3 TO SET THE INBOUND AND OUTBOUND VALUES TO THE ROUTER INDIVIDUALLY FOR THE DVR:
3. – Go into the “Virtual Servers or Port Settings” in your ROUTER Admin Menu.
– Enter the settings & values below:
Enable your DVR for the port ranges inbound and outbound:
Depending on how your Router’s Settings Menu is, create 4 separate entries.
Set or select TCP for each entry.
Set the DVR IP Address for each entry. (ex. 192.168.2.88)
Assign or Allow Ports for the DVR below:
1. Inbound & Outbound Port Range 34567-34600 (allows for network video)
2. Inbound & Outbound Port Range 80-80 (allows for network Browser connectivity)
3. Inbound & Outbound Port Range 23-25 (allows for email notifications)
4. Inbound & Outbound Port Range 465-466 (allows for mobile device logon)
This will allow remote operation from Outside your home network.
REMEMBER THAT REAL IP ADDRESS THAT YOU WROTE DOWN? (from your ISP)
Here is the what & how:
You have a DVR set to a private IP address on your home network along with other computers & devices, printers, etc.
You have a “real IP public Internet address” given to you by your ISP.
You have setup your Router to “translate requests on specified ports to be directed to your DVR from outside your home network.
When you use INTERNET EXPLORER ONLY browser, you will type in the ACTUAL IP address into the browser’s address bar. (Example: 126.96.36.199 ) – and since you are using a browser, any request that comes to your Router on PORT 80 will be directed to your DVR, along with the other port ranges you have specified. (the “other” ranges are for mobile devices and email, txt alerting services your DVR performs.)
Repeating myself, type in the ACTUAL IP Address (from your Provider or Modem) into your browser and you will arrive at the LOGON Screen of your DVR from any computer in the world with an Internet connection!
You can now logon, view, change, administer, remotely record, transfer video files, etc., over the Internet.
(If your are at another computer inside your personal home network, you may enter in the home network IP address to connect)
Example: Start Internet Explorer (only) and type in the local IP address of the DVR ex.: 192.168.2.88 – this only works if you are inside your own network and not from a remote computer at a friends house or work.)
To get the Mobile App working you need to go to the supplied Mini CD-ROM and install EasyView2 to your mobile device.
You will need to adjust settings for your mobile device to access your DVR. You can find the port # (34600) and the DEVICE I.D. NUMBER in the NETSERVICE MENU (of the DVR) and clicking on CLOUD to show the Device ID. You will need these two pieces of information to setup the mobile viewing app. (which works really well, but is limited in administering the DVR remotely.)
Inside the Mobile Monitor folder are two nefarious folders.
The one labeled “P2P Mobile Phone Software” has the working version of ViewEasyV2 (version 2).
View Easy is the Mobile App you use to view on your mobile device.
You can also use ONLY INTERNET EXPLORER BROWSER to logon and view video streams live.
You may need to upgrade or install an Active X app to update your browser.
SATA is a type of Hard Disk Drive (Serial ATA) (Do not use SATA I or SATA III) (USE SATA II ONLY)
If you don’t have a SATA II Hard Drive (HDD) you can still record streams and capture video & snapshots using your Internet Explorer Browser, but it will be very slow, and you most likely will not be able to record all the streams at once smoothly with fluid motion unless you have a super computer…which you don’t or you wouldn’t be reading this.
The streams you record from your browser are saved on the local machine your are using and can be viewed, archived, deleted without affecting the DVR videos.
There is also a software app on the CD-ROM that lets you play and/or convert H.264 video files.
There are many nice configuration features available in the menus.
You may need to set up “Port Routing”, NAT, DMZ settings on your Cable Router or Modem to allow DVR traffic to and from the Internet as well as any Firewall settings.
If you simply want a DVR recorder to monitor your home or small business you can easily hook this up with little effort or knowledge. You could even use it without a Hard Drive and record the video onto a VHS or DVD recorder instead of installing a Hard Drive into the Security Unit. – OR- You can logon with the CMS Application (installed from mini CD-ROM) and record the video stream(s) to your remote location on the remote computer. – No Hard Drive needed, but highly recommended. Each camera records its own video file.
If you want to get fancy and have it set for mapped motion detection, text alerts, alarm messages sent to your phone with a snapshot photo, schedule recording times, days, cameras, profiles, you can do this as well, you tech-savvy geek you!
For what you are paying for this system, the cameras work just fine and the mounts are a terrific, versatile yet simple design made out of sturdy metal that swivel in any direction easily adjustable.
This newer model has buttons on the front that I am assuming you can use for programming the menus should you not have a mouse.
It also has an extra USB port on the front of the DVR for easy “mouse-ing.”
I am using an Ethernet Cable, but according to the manufacturer you can get a USB Rt3070 Chipset 802.11n 150m Wifi Wireless-n Card Dongle Adapter Wireless USB device to plug into one of the rear USB ports for Wireless connectivity. I have not tried this, and another user said they were unable to get their wireless dongle working, but you might have to get the correct one for it to work Amazon sells it for around 12 bucks: “USB Rt3070 Chipset 802.11n 150m Wifi Wireless-n Card Dongle Adapter”
You can also plug an External USB Drive or Flash Drive into the USB port and copy/backup the video files on the internal Hard Disk Drive if you have installed one. YOU CANNOT USE A USB DRIVE FOR A HDD SOURCE TO RECORD VIDEO OR CAMERAS.
Plenty of adjustments, color, hue, saturation, contrast and the unit has the Pan/Tilt/Zoom technology built-in to control PTZ Cameras remotely and programmed.
If you are even 1/4 adept at computers, you can do this, and when I post the “walk-through” setup, (after I fully assess the DVR and give my final opinion after a break-in period) – it should explain this and make it much easier.
When I opened the case to install the HDD, (4 easy side screws) I didn’t look to see it there are any “RESET” terminals or jumpers, so it might be BEST NOT TO FORGET YOUR PASSWORD. You might have to call China for help!
There is a Master Reset To Factory Defaults if you screw things up and need a fresh start, but keep in mind, you need to be logged on to do this, so DFYP (Don’t Forget Your Password)
I have also noticed that after making some changes to the settings, they didn’t take effect until I rebooted the DVR unit so make that a habit after every change just to make sure.
A good resource for “How-To” instructional video is YouTube!…but for now… GOING TO SLEEP!
YOU BETTER GIMME A THUMBS UP FOR THIS MASSIVE BRAIN DUMP! – (smile!)
61 of 66 people found the following review helpful.
cheap price because its cheap junk !!
By ben m
the system is a piece of junk. the cams are not weatherproofed. i mounted 2 cams outside and endured the weather until there was a sever storm. the inside of the cam lens fogged up with condensation once the hot sun blasted them after the storm. the night visions began to degrade afterwards as well. so i took out the other 2 cams from the box from the closet, and both lenses were “cracked” !! the only thing that has lasted is the dvr. now i have to to spend more money and time to find cams. sure, the vendor would replace the cams, if i paid shipping back to them. but i would probably get junk in return, plus for the price of shipping i might as well buy cams of a different brand. (any suggestions?)
91 of 107 people found the following review helpful.
… is green the first time I powered it on like wtf I didn’t spend money for this
One no remote I set up everything hard drive and all and the screen is green the first time I powered it on like wtf I didn’t spend money for this bs
Features of this product
- HD Video Recording: 4ch full 960H CCTV DVR recorder and 4 x 900TVL night vision security cameras give you every detail you need from longer distance
- Remote Viewing and Activate: Access & view in real time video signal from anywhere in the world by connecting to the Cloud CCTV DVR system.
- Easy to Setup: Connect to the internet & smartphone in minutes using the Innovative P2P technology without any complicated port mapping.
- Smartphone Compatible: Surveillance in the palm of your hand with live view & record on your smartphone including iPhone and android device.
- Intelligent Motion Detection: send email alarm with photo attached whenever an activity is detected
A lot of crimes are happening in the home. This has increased the necessity to have a security system in your own home. Parents and homeowners are certainly not always at home. Thus, important things and people are left at home unprotected and unsafe from people who are out to do them harm. Seeing that parents are gone for a long time everyday, a surveillance DVR is the only thing that can deal with this as compared to VCRs that can simply deal with small amounts of time.